LUMINAIR LTD - ECO-FRIENDLY LED LIGHTING & SUSTAINABLE LIGHTING DESIGN

SPECTRA UFO 36 :

Versatile, LED based, IP68 indoor or outdoor light units incorporating the Spectra colour changing light drive and a range of mounting options and accessories.

Versatile range of mounting hardware for multiple configuration.
Low voltage, IP68 modules ideal for all uses indoor and out.
Controllers for colour change speed, static colour selection & white mode.
Additional eco-friendly shades and LED covers.

- Silver or Black anodised SUFO 36 light module : LSUFO-101-S or -B
- Silver or Black anodised Spectra colour mode control panel : LSUFO-101-S or -B

DETAILS :

The SPECTRA UFO 36 full colour LED light unit combines a lightweight, robust and watertight machined aluminium casing with our in-house designed SPECTRA colour changing and highly energy efficient LED light engine.
It is equally at home indoors as well as out, with it's range of accessories the unit can be used as an inset light, pendant lamp, wall mounted up or down lighter or positionable spotlight.
The S-UFO 36 is designed to last... our unique, thermally engineered design means that heat is dissipated away from the LED ensuring their long lifetime is maintained while also using the maximum light available from the light source. The aluminium we use contains a 30% minimum recycled content , is sourced in the UK and is easily recyclable. All parts are anodised to 25 microns in either a natural or black finish so will last for yonks! This and our extremely energy efficient LED light engine offers a viable and eco-friendly long term lighting solution.

CONTROL & CONNECTION

The SPECTRA UFO-36 units can be connected together and colour modes controlled via the SPECTRA CONTROLLER. The SPECTRA CONTROL unit incorporates a central touch sensitive switch with illuminated surround to indicate the global light output of the connected units and an optional IR remote control unit is also available for mode control.
Every touch of the switch will change between the four modes listed below. Touching and holding down the switch will enable control of each modes parameters :

Mode 1 : RGB spectrum colour change. The light will cycle at the selected speed through the RGB colour spectrum. Touching and holding the switch will change between 3 cycle speeds. A white flash will indicate when the speed is changed.
Mode 2: Static colour light output. When the switch is touched in mode 1, the light fitting will stop at the colour when pressed. Touching and holding the switch will enable the user to cycle through the colour spectrum until a desired colour is found and the switch released to hold at that colour.
Mode 3: White light output. In this mode all the fittings LEDs are illuminated and a white light output is achieved.
Mode 4: Standby. Touching the switch will return to mode 1.

See the Spectra controller page for more information.